Product model: XMTA-7000 series
Shape size: 96 (wide) *96 (high) *90mm
Examples of commonly used models: XMTA-7411 XMTA-7512, etc. (reference product selection notes)
First, an overview
XMT*7000 series instrument is an intelligent double row four bit display instrument, showing the measured value and set value respectively, the instrument is four key operation, the parameter is set quickly, the parameter symbol is simple, the input information is convenient, the control mode has two position, the time ratio, the fuzzy PID, the parameter self-tuning function, the instrument adopted in The chip is designed with high reliability. The red and green double color double tube digital tube displays both measured and set values simultaneously.
Two. The main technical parameters
1, the measurement error is + 0.5%F. S + 1, the additional cold end error is less than or equal to 2 degrees.
2. Relay output contact capacity: resistive load 220V /5A
3, drive solid state relay signal output: drive current greater than 15mA, voltage greater than 9V
4. Driving thyristor pulse output: phase shift or zero crossing trigger pulse with a width greater than 3V and a width greater than 40us.
5, control cycle: relay output is 2~120 seconds, the other 2 seconds.
6. Work power: AC85V~242V, 50~60 Hz
7, working environment: 0~50 C, relative humidity less than 85%RH, no corrosive and no strong electromagnetic radiation occasions.
Three. The meaning of the product model:
XMT  □—     7       □            □       □         □
(1)   (2)              (3)          (4)    (5)      (6)
(1) outer shape and opening size: air: 160 x 80 x 90152 x 76; A: 96 x 96 * 9092 x 92; D: 72 * 72 x 11068 * 68; E: 48 * * 96 * 96; S:.
(2) serial number: 7000 series, double row four digit display.
(3) the main control method:
'0': two bit adjustment; '2': three bit adjustment; '4': contact switch two bit PID adjustment;
"5" two bit solid state relay or two bit solid state relay PID regulation; "6" single-phase phase-shift trigger regulation;
The "7" single phase zero trigger control or single phase zero crossing trigger PID regulation; "9" continuous PID standard current signal output;
(4) additional alarm:
There is no alarm for "0"; "1" upper limit contact alarm; "2" lower limit contact alarm; "3" upper and lower limit contact alarm.
Deviation alarm on '4'; deviation alarm under '5'; and '6' deviation alarm.
(5) input signal classification: '1' thermocouple; '2' thermal resistance;
(6) post dropout: 'D' relay is 30A high power